iNet_forum_header_100112
Canon USA
Reply
New Contributor
rslifer
Posts: 1
Registered: ‎08-16-2013

MX922 scanning

I have converted to Mountain Lion and have loaded the new scanner driver.  However, with Lion when I scanned a multipage document, the scanner software kept it together as one document.  Now it is coming out as separate pages and I have to set up folders for them to keep them together.  How do I change the settings to have multipage scans stay together?

Please use plain text.
Product Expert
MarkII
Posts: 215
Registered: ‎08-07-2013

Re: MX922 scanning

Hi rslifer,

 

Making an adjust to the IJ Scan Utility settings should fix this problem.  Follow these steps:

 

  1. Open the IJ Scan Utility.
  2. Click the Settings... button in the bottom right of the window.
  3. Highlight Document Scan, to view the document scan settings.
  4. In the Save Settings section, change the Data Format to PDF (Multiple Pages) and click OK
  5. Back at the IJ Scan Utility window, load your documents in the ADF and click the Document button to start your scan.

If you have any other questions on adjusting your scan settings, please feel free to Contact Us!

 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Please use plain text.
New Contributor
kaylorsan
Posts: 1
Registered: ‎11-18-2013

Re: MX922 scanning

Any chance that the 922 will be able to run MP Navigator in the future?  I have an 870 and find that the software interface (MP navigator) is much easier to use and much more intuitive than the software that came with the 922.

 

I'm used to just dumping a pile of papers in the ADF on the 870.  I select single/double sided and color/B&W and I get a nice list of thumbnails after the scannng is complete.  Then I can simply check what thumbnails belong together.  I can make 1 document, or many individual ones.

 

With the 922, it seems like I have to scan each document (single or multiple page) as a scan.  I used the IJ scan utility to set the parameters for each scan.  It seems like a step backward to me from my 870 software.

 

FWIW, I the MP navigator won't recognize my 922.

 

Any support/advice would be appreciated.  I love my new 922, but the scanning functionality for my particular needs does not meet my expectations.

Please use plain text.
Product Expert
Michael
Posts: 715
Registered: ‎10-16-2012

Re: MX922 scanning

Hello kaylorsan.

 

The MX922 cannot be used with the MP Navigator.  Scanning with the MX922 would have to be done with the IJ Scan Utility or the My Image Garden program.

 

If additional assistance is needed, feel free to call us at 1-800-OKCANON.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Please use plain text.
New Contributor
kphandley
Posts: 1
Registered: ‎08-26-2013

Re: MX922 scanning

Hi, I recently purchased a MX922 and am trying to scan. I am getitng an error that the scanner driver cannot be found. I have reinstalled it several times with no luck. I can print from the iMac (mavericks) fine, but cannot scan. Any ideas and is this related to your post below?

Please use plain text.
New Contributor
asergi
Posts: 1
Registered: ‎08-14-2014

Re: MX922 scanning

Hi Michael.  Can you please confirm whether there's been any change to this?  Can the MX922 now use MP Navigator EX?  It says in the specs for the MX922 that it can, but I still have no luck. (see note #9 here).

 

If not, is there ANY way that support for the MX922 can be added to MP Navigator EX software??  The software's ability to display multiple thumbnails as you go is a wonderful, excellent and vital feature not present in the ScanGear software.  Having to wait until you go to save the file before seeing the scans is not very useful at all. 

 

Thank you.

 

 

Please use plain text.
Product Expert
Patrick
Posts: 228
Registered: ‎07-28-2014

Re: MX922 scanning

Hi kphandley,

 

Are you using your PIXMA MX922 with a USB cable or wirelessly?

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Please use plain text.
Product Expert
Patrick
Posts: 228
Registered: ‎07-28-2014

Re: MX922 scanning

Hi asergi,

 

The MP Navigator has not been updated to include the PIXMA MX922.  At this time, there are no plans to add support to the MP Navigator for PIXMA MX922 use.  Your suggestion as been passed along to our Development Team.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Please use plain text.