iNet_forum_header_100112
Canon USA
Reply
New Contributor
glwun
Posts: 1
Registered: ‎11-26-2012

I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Is there a fix for a canon pixma 620 that is giving me an error message 620. I reset the printer -- unplugged for 10+ minutes.  That didn't work.  Then took the print head out and cleaned and dried it.  Replaced it .....that didn't work.  Is there a home fix for this.  If not I will be in the market for a good all in one printer...scanner etc.  Any suggestions.  Thanks glwun

Please use plain text.
Product Expert
Michael
Posts: 715
Registered: ‎10-16-2012

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Hello glwun.

 

Please try the following to see if we can resolve your issue:

 

1.  Open the cover of the printer.

2.  Remove all ink tanks from the printer.

3.  Lift up the gray locking lever on the side of the ink tank holder.

4.  Gently remove the print head from the carriage unit.

5.  Place the print head back in and lock the lever down.

6.  Place all of the ink tanks back in the printer.

7.  Close the cover and turn the printer off.

8.  Unplug the power from the printer.  Leave the power unplugged for about 5-10 minutes.

9.  Plug the power back in and turn the printer on. 

 

Unfortunately, if the error persists, please contact a technical support representative using the "Contact Us" link below for additional assistance.

 

This didn't answer your question or issue? Find more help at Contact Us. 

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Please use plain text.
New Contributor
kellzo
Posts: 1
Registered: ‎01-20-2013

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Hi there, 

Unfortunately, I'm still struggling with the same error code after trying the steps recommended. 

Is there no easy way out of this one? There's plenty of youtube videos where people smash their printers in response to this error, so I'm not too optimistic. 

Please use plain text.
Moderator
Stephen
Posts: 486
Registered: ‎10-25-2012

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

If the above solution didn't solve your B200 error, we'd recommend you contact us for further troubleshooting by clicking this LINK

 

Thank you!!

Please use plain text.
New Contributor
jpechacek
Posts: 1
Registered: ‎02-26-2013

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

I followed the recommended steps and still get the B200 error code.

Please use plain text.
Frequent Contributor
Naomi
Posts: 115
Registered: ‎10-16-2012

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Hi jpechacek!

 

If you're still running into the B200 error code, we recommend contacting our technical support agents.  They'll be able to provide additional troubleshooting or service options, if needed.  You can contact Canon Support through the link in Stephen's post, or find more help at Contact Us.

 

Hope this helps!

 

 

Please use plain text.
New Contributor
jumma
Posts: 4
Registered: ‎03-14-2013

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Some solution have been given here. Perhaps they worth a try

Canon Error B200

Please use plain text.
New Contributor
rmarien
Posts: 2
Registered: ‎05-28-2013

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Did not help. What else can I do?

Please use plain text.
Frequent Contributor
Naomi
Posts: 115
Registered: ‎10-16-2012

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Hello rmarien,

 

If you're still running into the B200 error code, you'll want to our technical support agents.  If you've tried all the suggestions in this thread and our other B200 error discussions, service may be required.  You can contact Canon Support through the link in Stephen's post, or find more help at Contact Us.

 

Thanks!

Please use plain text.
New Contributor
rmarien
Posts: 2
Registered: ‎05-28-2013

Re: I am getting an error b200 on my pixma mp620 printer. What should I do to fix this?

Thanks. I have sent an email to support.

Please use plain text.